Buy Patio Doors

Where to Buy Simonton Patio Doors: Dealers, Online, Quotes

Bright home exterior with a central vinyl sliding patio door open on a quiet patio.

Simonton patio doors are sold exclusively through a blank" rel="noopener noreferrer">network of authorized local dealers, contractors, and regional distributors, not directly from Simonton's website or on Amazon. To find one near you, go to Simonton's "How to Buy" page, blank" rel="noopener noreferrer">enter your ZIP code, and you'll get a list of contractors and retail installation partners in your area. If you want to compare local options, start by checking authorized dealer listings for where to buy Marvin patio doors near you. That's the fastest, most reliable path to a real quote and a warranty-backed install. Everything below helps you get from that first search to a signed contract without overpaying or missing something important.

Start with the right Simonton door and specs

Side-by-side home exterior patio doors showing vinyl sliding and hinged/French door panel configurations.

Before you call a single dealer, get clear on what you actually need. Simonton offers patio doors in a few main configurations: sliding patio doors (two or three-panel), hinged French doors, and in-swing or out-swing single doors. The most popular residential option is the sliding door, it doesn't eat into your interior or exterior clearance, which matters a lot if you have a tight deck or a screen door to accommodate. French doors add curb appeal but require more swing clearance and typically cost more to install.

Simonton's patio door lines are almost entirely vinyl (PVC) framing, which is the right call for most climates. Vinyl doesn't rot, doesn't need painting, and handles temperature swings well. If you've been comparing Simonton to brands like Andersen, Marvin, or Pella, one honest trade-off is that Simonton doesn't offer wood-interior options, so if you want a stainable wood look on the inside, that's worth factoring in before you go deep into quotes.

Glass package matters more than most people realize, especially if you're in a hot southern climate or a cold northern one. Look at the U-factor (lower is better for heat loss) and Solar Heat Gain Coefficient, or SHGC (lower is better for cooling-heavy climates). Simonton offers Low-E glass packages with argon gas fill that can hit U-factors around 0.27–0.30 depending on the line. If you're replacing an old aluminum-frame slider, this upgrade alone can noticeably cut your energy bills.

Standard rough opening sizes for a two-panel sliding patio door are typically 72 inches wide by 80 inches tall (6/0 x 6/8 in door-speak). Three-panel sliders often go up to 108 or 144 inches wide. Measure your rough opening before anything else, width and height of the framed opening, not the old door unit itself. If your opening is non-standard, flag that immediately when you contact dealers, because custom sizing affects lead time and price significantly.

How to find authorized Simonton dealers and confirm your warranty coverage

Simonton's official distribution model means the only way to get a factory-backed product and warranty is through their authorized channel. Here's how to find and vet a legitimate dealer:

  1. Go to Simonton's website and click "How to Buy." Enter your ZIP code to generate a list of nearby authorized contractors and retail installation partners.
  2. Call at least two or three from the list. Ask directly: "Are you an authorized Simonton dealer?" and "Can you pull the Simonton warranty on my behalf if I have a product issue?" A real authorized dealer will say yes to both.
  3. Ask which Simonton product lines they carry. Simonton notes that product offerings vary by region, so not every dealer stocks every line. If you have a specific series in mind, confirm availability upfront.
  4. Check that the installer is licensed and insured in your state. This matters for the installation warranty, which is separate from the product warranty — more on that below.
  5. Look up their reviews on Google, Houzz, or the BBB. A dealer with a thin review history or one that primarily sells other brands isn't necessarily a red flag, but you want someone who installs Simonton doors regularly.

One thing worth knowing: some independent window and door dealers are authorized for Simonton but may push you toward a brand with a higher margin if you're not specific. Walk in knowing the product line you want (or at least the door type and glass package), and ask them to quote that specifically alongside any alternatives they recommend. That makes it easier to compare apples to apples.

Online, big-box, and marketplace options: what works and what doesn't

Split-screen photo showing two door listings: an authorized dealer-style listing image vs a vague marketplace-style list

You won't find Simonton patio doors on Amazon, Home Depot's website, or Lowe's shelves in any meaningful way. Simonton doesn't use mass-market retail channels for their door products the way some brands do. This is different from, say, buying a Pella or Andersen door at a big-box store, those brands have specifically built out retail programs. For similar shopping guidance, you can also check where to buy Pella patio doors buy a Pella or Andersen door. Simonton's path is dealer-to-homeowner, full stop.

If you see a listing on Facebook Marketplace, Craigslist, or eBay claiming to sell new Simonton patio doors, be skeptical. These are usually discontinued stock, pulled units from job sites, or damaged returns. You won't get a warranty on a used or salvaged door, and you'll still need to pay for professional installation anyway, so the math rarely works out in your favor. The one exception is if you're doing a non-standard rough opening and find an exact-size unit from a reputable contractor clearing out inventory. Even then, verify the unit hasn't been installed before and that the glass seal is intact.

Some regional building supply distributors (think mid-size lumberyards or window-and-door specialty supply houses) carry Simonton and will sell to homeowners. These can be great if you want to compare the door price separately from installation labor. Just make sure they're an authorized Simonton distributor before you assume the warranty applies.

How to get accurate quotes, what to have ready before you call

The single biggest reason quotes come back wrong is that homeowners give dealers incomplete information. Dealers end up quoting a "standard" door at a "standard" price, and then the actual job scope reveals itself during installation, which is how you end up with surprise charges. Here's exactly what to have ready:

  • Rough opening dimensions: width x height of the framed opening (not the old door unit). Measure at top, middle, and bottom — use the smallest width.
  • Current door type and configuration: how many panels, which side is the active panel, in-swing vs. out-swing if applicable.
  • Material condition of the surrounding framing: any rot, water damage, or out-of-square framing needs to be disclosed upfront. This adds labor cost.
  • Interior and exterior trim situation: are you keeping existing trim or replacing it? Does the new door's frame depth match your wall thickness?
  • Glass package needs: tell them your climate zone, which direction the door faces (south-facing doors in hot climates need low SHGC), and whether you want tempered or laminated glass for security.
  • Hardware finish preferences: Simonton typically offers a few hardware finish options (white, tan, bronze, etc.) — pick one before quoting so the price is firm.
  • Whether this is a replacement in an existing opening or new construction framing.

When you contact dealers, ask for a written, itemized quote that separates the door unit cost from the installation labor. This lets you compare quotes properly and also tells you a lot about the dealer, ones who won't itemize are usually hiding margin somewhere. Get at least three quotes. Lead times in 2026 are generally 4–10 weeks for standard sizes and up to 14–16 weeks for custom configurations, so factor that into your project timeline.

Questions to ask every dealer before you sign anything

Close-up of dealer contract terms checklist beside a door order sheet on a desk near a doorway

Once you've got quotes in hand, there are a few things worth pinning down before you commit. These aren't just box-checking questions, they're the ones that come up later if something goes wrong.

Question to AskWhy It Matters
What's the Simonton product warranty on this door, and does it transfer if I sell the house?Simonton's limited lifetime warranty on vinyl patio doors typically covers the product to the original purchaser. Transferability varies — confirm it.
What's your installation warranty, and how long does it cover labor and workmanship?Product and install warranties are separate. A good installer offers at least 1–2 years on labor; some offer 5.
Do you handle both supply-and-install, or can I buy the door separately and hire my own installer?Some dealers only do supply-and-install. Knowing this upfront saves negotiating time.
What's your process if a component fails after install — who do I call, you or Simonton?You want a dealer who acts as the warranty liaison, not one who sends you directly to the manufacturer.
What's the current lead time for this specific door, and is that guaranteed?Lead times can stretch. Get the estimate in writing with a contingency plan.
Do you handle disposal of the old door unit, and is that included in the quote?Disposal is sometimes billed separately and can add $50–$150 to the job.
Can you get replacement parts (rollers, locks, weatherstripping) for this model after installation?Important for long-term serviceability, especially for older Simonton lines.

What a Simonton patio door actually costs, door, install, and everything else

Total installed cost for a Simonton patio door in 2026 typically runs $1,800–$4,500 for a standard two-panel sliding door in a straightforward replacement scenario. That range covers the door unit, basic installation labor, and standard trim work. Here's what pushes the number higher:

  • Door size: a 6-foot wide slider is cheaper than an 8- or 9-foot wide unit. Going to a three-panel configuration can add $500–$1,200 to the door price alone.
  • Glass package upgrades: Low-E coatings, argon gas fill, and impact-resistant glass add cost. Impact glass (common in hurricane zones) can add $300–$700.
  • Hardware and finish: upgraded locks, multi-point locking systems, and premium hardware finishes add $50–$250.
  • Frame prep and framing repairs: if the rough opening has rot or needs reframing, labor costs jump. Budget $200–$600 extra if your opening is anything but clean and square.
  • Trim and finishing: interior and exterior trim matching your existing profile can add $150–$400 if it's not a simple paint-grade install.
  • Removal and disposal of the old door: typically $75–$150 if not included in the quote.
  • Installation complexity: second-floor installs, difficult access, or jobs requiring extra crew members cost more than a standard ground-level swap.

For comparison, the door unit itself (without installation) typically runs $900–$2,200 depending on size and glass options. Installation labor for a clean replacement job usually runs $400–$900. If your quote comes in significantly below $1,500 installed for a standard door, ask hard questions about what's not included. If it's above $5,000 for a basic two-panel slider with no framing issues, get a second opinion.

Picking the right accessories and upgrades before you finalize the order

Patio door accessories neatly arranged: screen panel, lock hardware, and window covering options.

A lot of homeowners forget to think through accessories until after the door is installed, and that's when it gets annoying. Screens, security hardware, and door coverings are much easier (and sometimes cheaper) to coordinate during the original order. Here's what to consider:

Screens

Simonton sliding patio doors typically come with an option to add a matching screen panel at the time of order. This is usually the cleanest fit because the screen track is integrated with the door frame. Retractable screen options are also available through dealers and fit better when ordered with the door versus retrofitted later. If you're adding a pet-resistant screen mesh, specify that during the quote, standard fiberglass screen mesh won't survive a large dog.

Security and locks

Standard Simonton patio door hardware includes a basic foot bolt and keyed lock, but if security is a priority, ask about multi-point locking systems that engage at multiple points along the door frame when you lock it. These are a significant step up from a single-point latch. You can also add a sliding door security bar (a simple steel bar that drops into the bottom track) as a backup, these cost about $20–$40 at any hardware store and add real peace of mind. For French-door configurations, a surface-mounted flush bolt on the stationary panel is worth adding if it's not already included.

Coverings

Think about how you'll cover the door before it's installed, not after. Vertical blinds fit sliding doors well but look dated to a lot of people. Sliding panel track blinds are a cleaner option and work nicely on wide openings. For French doors, shutters or panel drapes are popular. If you're in a high-sun climate, exterior sun shades or awnings can also reduce heat gain significantly and take some pressure off the glass package you choose, something to weigh when you're deciding whether to pay for premium Low-E glass versus adding an exterior shade.

Your action plan from here

Here's how to move from reading this to actually closing the purchase with confidence:

  1. Measure your rough opening today — width at top, middle, and bottom; height on both sides. Write it down.
  2. Decide on door type (sliding vs. French), panel count, and any must-have glass or security specs before you contact anyone.
  3. Go to Simonton's website, run the ZIP-code dealer search, and pull a list of 3–5 authorized dealers or contractors near you.
  4. Contact each dealer with your full specs (door type, rough opening size, glass preferences, hardware finish). Ask for an itemized written quote separating door cost from installation labor.
  5. Ask each dealer the warranty, lead time, and service questions from the table above.
  6. Compare quotes, check installer reviews, and confirm authorized status before signing.
  7. Confirm screen, security hardware, and any accessories are specified in the order before it goes to the factory.

Simonton makes a solid, well-priced vinyl patio door for most homes, the main thing that separates a smooth purchase from a frustrating one is showing up prepared. With your measurements in hand, a clear sense of what you need, and three competitive quotes from authorized dealers, you're in a strong position to get the right door at a fair price with a warranty that actually holds up. If you’re specifically trying to compare where to buy Milgard patio doors, start by checking Milgard’s dealer locator and then request itemized quotes from two to three local sellers.

FAQ

If I buy through a distributor instead of a contractor, will I still get the Simonton warranty?

Yes. When you order through an authorized channel, confirm the dealer will submit the installation under their Simonton authorization and that your warranty paperwork matches your address and door serial number. For extra protection, ask for the warranty terms in writing before the deposit, and verify whether the warranty covers both the door unit and glass package separately from labor.

What should I ask about if my rough opening is old, uneven, or damaged?

Tell the dealer exactly what your opening measurements are, including rough opening width and height, wall thickness, and whether the opening is level and square. If you have an uneven sill, older masonry, or rot around the frame, expect add-on framing or re-flashing charges, and ask for that line item to be included in the quote.

Do I need to replace siding or trim when upgrading to a Simonton sliding door?

If you are replacing like-for-like (same door type and similar opening), you can usually keep trim and exterior siding changes minimal, but it depends on how far off the old unit is. Ask whether the quote includes removal, disposal, re-flashing, and matching exterior trim, and request photos or a written description of the expected scope.

Will better glass actually lower my energy bills if the installation is done poorly?

Low-E with argon helps, but the bigger savings often come from proper installation details. Ask the installer how they will seal the perimeter (flashings and air/water barrier tie-ins) and what they will do about the threshold area, because poor sealing can erase the energy benefit.

For French doors, how do I make sure the swing will work with my deck and screen door?

Ask for measurements of clearance and swing radius (for French or out-swing doors) and whether nearby features like a railing, screen door, or deck step will interfere with operation. Dealers should confirm hardware hand and swing direction before ordering, since changing it later can mean a remake or delay.

What’s the difference between a fixed-price quote and an allowance-based installation quote?

Yes, but compare terms carefully. If the quote is a price-for-the-door plus an installation allowance, ask what happens if conditions change (framing, rotted substrate, required repairs). A clear scope statement should list what is included and what triggers change orders.

How do I confirm lead time and avoid surprises when adding a screen or security accessories?

For most standard replacement projects, lead times are driven by door configuration and glass package availability. Ask your dealer for the exact estimated ship date and whether the timeline changes if you add a screen, retractable screen, or security hardware, since those accessories can affect scheduling.

What installation details affect whether the door locks and slides smoothly?

You should assume you can control it. Ask whether the quote includes leveling, shimming, and any sill modifications needed for correct operation, then request a checklist for performance testing (smooth lock engagement, even panel alignment, and lock throw).

Can I add a pet-resistant screen later, or should I order it with the door?

Ask the dealer which screen option they recommend for your door type and climate, then specify the mesh material. For pet use, request a tougher pet-resistant mesh option during ordering, because retrofitting later can cause poor fit or loose frames.

What common items are missing from incomplete quotes?

Yes. If the quote only lists the door and labor, ask for missing basics like disposal, interior trim, exterior caulk/flashings, and any permits or inspections. If they do not mention permit handling, ask who pulls permits and whether permit costs are included in the total installed price.

Next Articles
Where to Buy Andersen Patio Doors: Best Sellers
Where to Buy Andersen Patio Doors: Best Sellers
What Is a French Patio Door? Features, Types, Cost
What Is a French Patio Door? Features, Types, Cost
Do French Patio Doors Have Screens? Options for Insects
Do French Patio Doors Have Screens? Options for Insects