Most homeowners getting a Renewal by Andersen patio door installed end up spending somewhere between $3,000 and $8,000 total, with the majority of sliding door replacements landing in the $3,500 to $5,500 range and French door configurations typically running $4,500 to $8,000 or more depending on size, glass package, and what your existing opening needs. That's fully installed, including removal and disposal of the old door. If you're only dealing with a damaged screen, the cost to rescreen a patio door can be much lower than replacing the whole door unit how much does it cost to rescreen a patio door. The wide range isn't vague filler: it reflects real differences in door width, panel count, glass upgrades, and site conditions that Renewal by Andersen prices individually during their in-home consultation.
How Much Does a Renewal by Andersen Patio Door Cost?
Typical Renewal by Andersen patio door cost ranges
Here's how the numbers typically break down by door type and common configuration. These are installed totals, not just product prices.
| Door Type | Common Configuration | Typical Installed Range |
|---|---|---|
| Sliding/Gliding Patio Door | 2-panel (standard 6 ft width) | $3,000 – $4,500 |
| Sliding/Gliding Patio Door | 3-panel or wider (8–12 ft) | $4,500 – $6,500 |
| French/Hinged Patio Door | Double door (standard 60–72 in) | $4,500 – $7,000 |
| French/Hinged Patio Door | With sidelights or larger opening | $6,000 – $9,000+ |
| A-Series Contemporary Hinged | High-end glass + lock upgrades | $5,500 – $9,000+ |
These ranges assume a straightforward replacement with no major structural work needed. If your rough opening needs to be modified, costs can climb quickly. If you're comparing against a standard patio door replacement from another brand or installer, keep in mind that those quotes often don't include removal, disposal, or a warranty on the labor itself.
Renewal by Andersen vs. Andersen: what you're actually paying for
This trips people up constantly. Andersen and Renewal by Andersen are related brands, but they're very different buying experiences. Andersen Windows sells its products through authorized dealers, big-box retailers, and contractor supply channels. You buy the door, you (or your contractor) install it. Renewal by Andersen is Andersen's full-service replacement division: they sell, supply, and install using their own crews, and they back the whole job with a single transferable limited warranty that covers both the product and the installation.
What does that mean for price? When you buy an Andersen patio door through a dealer or supply house and hire a separate installer, you might pay $1,500 to $3,000 for the door product alone and then separately negotiate labor. For patio screen doors, the cost usually depends on the door size, frame material, and whether you are upgrading to a higher-end screen system. The total can end up similar to a Renewal by Andersen quote, or it can be less if you're doing a simple swap with a competent contractor. But the Renewal by Andersen model gives you one point of contact, one warranty, and built-in removal and disposal, which is genuinely useful for a project where mistakes cost real money. You're paying for certainty as much as the product itself.
Renewal by Andersen's warranty is transferable to a future homeowner, which is a legitimate value-add if you're planning to sell the house. Andersen's separate product warranty covers the door hardware and components, but it won't cover installation workmanship the way Renewal by Andersen's combined warranty does. These aren't just marketing points: they affect what happens if something goes wrong three years from now.
What actually drives your quote up or down
Door size and panel count
This is the single biggest variable. A standard two-panel sliding door at 60 or 72 inches wide is the baseline. Move to an 8-foot or 12-foot opening with three or four panels, and both the product cost and the installation complexity jump substantially. Height matters too: a standard 80-inch door versus a taller 96-inch unit will affect pricing on both the frame and the glass area.
Door type: sliding vs. French vs. hinged
Sliding patio doors are generally the most affordable configuration because the mechanics are simpler and the framing is straightforward. French and hinged doors (including Renewal by Andersen's A-Series Contemporary Hinged line) cost more because of the swing clearance, hinge hardware, and multi-point locking systems. If you're choosing between the two styles purely on budget, a sliding door will almost always come in lower. Renewal by Andersen is clear that these are distinct products with different customization paths, not just aesthetic choices.
Glass package selection
Renewal by Andersen offers a tiered glass lineup. At the higher end you're looking at Low-E4 tempered glass with HeatLock coating and Low-E SmartSun tempered glass with HeatLock coating. SmartSun is designed to block more solar heat gain, which makes it the better choice for south- or west-facing doors in warm climates. These aren't just marketing tiers: each glass package has real NFRC-rated performance differences in U-factor and solar heat gain coefficient. Upgrading from base glass to a premium SmartSun package can add several hundred dollars to your quote, and it's usually worth it in climates with hot summers or significant sun exposure.
Hardware, locks, and add-ons
Renewal by Andersen's sliding doors come standard with their reachout locking system, which pulls the panel snugly against the jamb for both weathertightness and security. On the A-Series hinged doors, you can upgrade to a Yale Assure Lock keyless entry system, which is a meaningful convenience add-on but also adds to the quote. Between-the-glass blinds are available on select A-Series hinged door sizes (with Low-E4 glass), and that's priced as an option too. If you want TruScene or other insect screen mesh types, those are configurable by series and add cost per panel.
What's included in the standard Renewal by Andersen quote
Renewal by Andersen explicitly includes removal and disposal of your existing patio door as part of their Installation Advantage package. That matters because a lot of contractor bids exclude it or charge a separate haul-away fee. Beyond that, the standard installed quote covers the door unit itself, all factory-configured options you selected, installation labor by their own crews, and the combined product-and-installation warranty.
What's typically not included in the base quote: permit fees (if required by your municipality), screen upgrades beyond the included type, between-the-glass blinds (priced as an add-on option), lock upgrades like the Yale keyless system, and any work on the surrounding interior or exterior trim that you want to replace or upgrade. Ask specifically about each of these when you get your in-home estimate.
The extras that can push your quote higher
Even with Renewal by Andersen's full-service model, certain site conditions add real cost. Here's what to watch for:
- Rough opening modifications: If your existing opening isn't the right size or is out of square, the framing has to be adjusted. This can add $500 to $2,000+ depending on what's involved.
- Structural issues: Rotted sill plates, water damage around the existing frame, or deteriorated flashing require remediation before the new door can be installed properly. This is where quotes can balloon unexpectedly.
- Trim and casing: If you want new interior or exterior trim to match the door replacement, that's usually priced separately. A simple interior casing replacement might be $150 to $400; custom exterior trim work costs more.
- Permits: Many municipalities require a permit for patio door replacement, especially if the opening size changes. Permit costs range from $50 to $300 in most areas, but it varies widely.
- Waterproofing and flashing: A quality installation includes proper flashing, but if your existing conditions require special waterproofing details (common in older homes or wet climates), expect that to be called out separately.
- Accessibility threshold modifications: If you need a low-profile or no-threshold entry for accessibility reasons, that may require additional framing or sill work.
The best way to avoid surprise costs is to have the Renewal by Andersen design consultant do a thorough site assessment before finalizing any quote. Their in-home visit is specifically designed to identify these conditions.
How to get an accurate quote today
Measure before the appointment
You don't need exact measurements to schedule a consultation, but having them ready speeds things up and helps you compare bids from multiple companies. For a sliding patio door, measure the width and height of the overall frame from the outside, not just the glass area. Measure the rough opening width and height if you can access the framing. If your existing door has a product ID label (often on the jamb or sill), photograph it: it tells Renewal by Andersen exactly what series and size is currently installed, which helps them confirm whether the replacement is a direct swap or requires opening modification.
Questions to ask the design consultant
- Is removal and disposal of the existing door included in this quote?
- What glass package is included at this price, and what's the cost difference to upgrade to SmartSun with HeatLock?
- Is a permit required for this replacement in my municipality, and if so, who pulls it and at what cost?
- Does this quote include interior and exterior trim work, or is that extra?
- Are insect screens included, and which type/mesh?
- What does the warranty cover, and is it transferable if I sell the home?
- Is there anything about my current rough opening that could change the price after the site inspection?
- What's the lead time from order to installation?
Renewal by Andersen's process involves an in-home consultation before any final price is given. Don't try to lock down a number over the phone: the site-specific variables matter too much. The consultant visit is free, and it's the only way to get a quote that won't come with surprises on installation day. If you want to estimate how much to fit a patio door in your home, you’ll need to factor in the door size, configuration, and whether any opening modifications or permits are required.
Budgeting tips and how to compare your options
If your total budget is under $4,000 for an installed patio door replacement, a standard two-panel sliding door from Renewal by Andersen may be possible at the low end of their range, but you should also get quotes from other installers to see what's realistic in your market. This will help you estimate how much it costs to replace a patio door in your specific situation. Renewal by Andersen's pricing is generally at the premium end of the replacement window and door industry, and for many homeowners that's worth it. But if your opening is standard, your existing framing is solid, and you're not in a high-cost labor market, a quality Andersen dealer using a reputable contractor can sometimes deliver a comparable product at a lower total cost. The trade-off is that you're managing two separate warranties and two separate points of contact.
When comparing quotes across brands and installers, make sure you're comparing the same scope: installed price including removal, disposal, permits, and trim. A quote that looks $1,500 cheaper often excludes two or three of those line items. If you're also evaluating Pella or other premium brands, the cost ranges are similar at the high end, though Renewal by Andersen's bundled installation model is somewhat unique in the industry. If you want to compare specifically against Pella, look at how much a similar patio door would cost installed in your area Pella or other premium brands. For context, standard patio door replacement costs and new patio door pricing from other brands follow similar patterns, so the factors discussed here apply broadly when you're shopping around.
One practical tip: ask every company for an itemized quote, not just a single number. It lets you compare glass packages, screen options, and installation scope line by line. It also makes it much easier to decide whether an upgrade (like between-the-glass blinds or a keyless lock) is worth adding at the time of installation versus later.
Finally, think about your climate before finalizing the glass package. If you're in a cold northern climate, prioritize a low U-factor (better insulation). If you're in Florida, Texas, or another hot, sunny state, SmartSun glass with HeatLock coating is worth the premium because it meaningfully reduces solar heat gain through the door. Choosing the right glass at installation time is far cheaper than regretting the base package two summers later.
FAQ
How much does a renewal by andersen patio door cost for a standard replacement?
For a “like-for-like” replacement where the rough opening does not change and you stay with the included screen type and standard trim, most Renewal by Andersen patio door totals fall between about $3,000 and $8,000. If you want a clearer number, ask the consultant to price your job as two options: base glass plus your chosen glass tier, and “standard swap” versus “opening modification,” then compare the delta.
Why do quotes for the same renewal by andersen patio door vary so much?
Renewal by Andersen typically expects the existing door removal and haul-away to be part of their installation scope, but other bids may omit disposal, protection of flooring, or returning the threshold and sill to weather-tight condition. Before you compare, request a written scope checklist that states removal and disposal, permitting (if applicable), and whether trim repair or replacement is included.
Is the cost different if I only need repairs (like a screen, rollers, or a bent panel) instead of a full renewal by andersen patio door replacement?
If you replace the entire patio door unit, the installation should include removal and disposal under Renewal by Andersen’s Installation Advantage. If you are only trying to fix a broken component like a damaged screen, a bent frame section, or failing rollers, ask whether it can be handled as repair, not replacement, because component repair can cost far less than the full-door install.
What part of the renewal by andersen patio door price is most affected by glass upgrades?
Between a premium insulated glass package and a base glass package, the price change is usually driven by both the glass type and the specific door size, because more glass area means more cost. When you get your in-home estimate, ask them to show the price impact per glass tier for your exact width and height, so you can decide whether the SmartSun or Low-E4 upgrade matches your sun exposure.
Does the renewal by andersen patio door quote include permit fees?
If your municipality requires a permit, it will add to the overall project total, and some contractors only include it if you meet certain criteria. Ask the consultant to confirm whether a permit is required for a patio door replacement in your address and, if so, whether the permit fee is included in your quote or billed separately.
What situations can push the renewal by andersen patio door cost above the usual range?
If your rough opening is out of square, the surrounding siding or stucco needs patching, or the threshold area has rot or prior water damage, you can expect the “opening modification” path to cost more. Tell the consultant upfront if you have leaks, difficulty locking, or soft wood, and ask whether they will include any necessary framing adjustments in writing.
Can I assume my renewal by andersen patio door will be a direct swap, or will I likely pay for opening modifications?
Yes, but only if you have a direct match or you choose a configuration that fits the same opening without major changes. Provide your current door measurements (frame outside dimensions, and rough opening if accessible) and, if available, a product ID photo from the jamb or sill so they can confirm if it is a true swap or if they must modify the opening.
What should I ask for in the estimate so I can compare the renewal by andersen cost with other installers fairly?
To reduce unexpected surprises, ask for an itemized quote that separates door unit price, glass package, screen and mesh type, lock upgrades, between-the-glass blinds (if any), removal and disposal, labor, and any trim work. A single “total” number hides what is driving cost differences.
How do lock upgrades affect the renewal by andersen patio door cost?
A keyless lock upgrade like the Yale Assure Lock is priced as an option and can raise the total compared to the included standard hardware. If you are comparing costs across brands, make sure the other quote includes the same lock features (keyed versus keyless), not just the door style.
Does a transferable warranty really matter for resale, and is it included in the renewal by andersen patio door cost?
Yes. Renewal by Andersen’s warranty can transfer to the next homeowner, but other installers may only offer separate product and labor coverage, and labor coverage may not transfer. If selling soon matters to you, ask how long the combined transferable warranty remains valid and whether any future service calls are handled under that transfer.
